Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCV072 - Europe - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for FLEX NORYL™ Resin WCV072 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
FLEX NORYL™ WCV072 resin is a flexible, non-reinforced extrusion grade of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE) with a Shore D Hardness rating of 72. FLEX NORYL WCV072 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, and good dielectric strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di fusione di volume, MVR 13 cm³/10min ISO 1133
Temperatura 280 °C -
Carico 5 kg -
ASTM Data
Indice di fluidità a caldo, MFI 13.8 g/10min ASTM D 1238
Temperatura 280 °C -
Carico 5 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Modulo a trazione 1750 MPa ISO 527
Carico unitario a trazione 44 MPa ISO 527
Deformazione a snervamento 11 % ISO 527
Carico unitario a rottura 42 MPa ISO 527
Deformazione a rottura 46 % ISO 527
Modulo a flessione 1740 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 33 kJ/m² ISO 179/1eA
Resist. urto Izod con intaglio, +23°C, 4mm 36 kJ/m² ISO 180/1A
Resist. urto Izod con intaglio, -30°C, 4mm 6 kJ/m² ISO 180/1A
ASTM Data
Modulo a trazione 1710 MPa ASTM D 638
Resistenza alla trazione di snervamento 43 MPa ASTM D 638
Resistenza alla trazione a rottura 41 MPa ASTM D 638
Allungamento a snervamento 15 % ASTM D 638
Allungamento a rottura 83 % ASTM D 638
Modulo a flessione 1550 MPa ASTM D 790
Resistenza all'urto Izod con intaglio, 1/8 in 309 J/m ASTM D 256
Resistenza all'urto Izod con intaglio, basso temperatura 67 J/m ASTM D 256
Temperatura -30 °C -
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temp.di inflessione sotto carico, 1.80 MPa 98 °C ISO 75-1/-2
Temp.di rammollimento Vicat, B 114 °C ISO 306
Temp.di rammollimento Vicat, 120°C/h 50N 117 °C ISO 306
ASTM Data
DTUL a 264 psi 92 °C ASTM D 648
Temp.di rammollimento Vicat 114 °C ASTM D 1525
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.12 % Sim. alla ISO 62
Assorbimento d'umidità 0.05 % Sim. alla ISO 62
Massa volumica 1030 kg/m³ ISO 1183
Densità 1030 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Velocità di Rotazione della Vite 15 - 40 rpm -
Caratteristiche
Resistenza Chimica
Resistenza chimica generale
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.